ForceField® Tar- X 

Industrial Solvent

 

 

 

·   Dissolves Residues of Tar, Asphalt, Oil, Grease, Adhesive, Creosote, Etc.

·   Effective Alternative to Chlorinated

     Solvents

·   Spray, Dip or Brush/Swab

 

 

 

OVERVIEW

ForceField® Tar-X  Industrial Solvent is the ultimate solution to your degreasing and cleaning problems. This advanced technology formulation is a premium, fast acting, multi-purpose liquid solvent that replaces chlorinated products, butyl, or fuel oil. ForceField® Tar-X  is unsurpassed in rapidly removing asphalt and tar from equipment and tools; degreasing engines and engine parts, molds, dies and other industrial equipment; degreasing small parts in immersion applications. Mild pleasant odor.  Low foaming. Easy rinsing. Contains no toxic solvents, free alkalies, acids or abrasives.

How & Why ForceField® Tar-X  Works

ForceField® Tar-X  is formulated with a unique combination of proprietary dissolvents and surfactants that provide the means for this product to cut through and dissolve a wide variety of problematic soils such as grease, oil, tar, asphalt, creosote, gear oil, adhesive, tree sap, resin, glue and much more.

Applications

For tar and asphalt removal spray ForceField® Tar-X   Industrial Solvent undiluted onto the equipment to be cleaned and allow to set for several minutes depending on level of contamination or build up.  Agitate with a brush and hose water rinse if necessary. If rinsing is not necessary residual TAR-X will prevent initial sticking upon next use.  Small pieces of equipment can be immersion soaked for a few minutes and hosed off with water.

For general cleaning and degreasing pour 4 to 6 ounces of ForceField® Tar-X into a gallon of water (warm preferred) and applied by swab to greasy equipment, floors, walls, decks, or any heavily soiled surface. Allow setting for a few minutes depending on soil level and rinse with water. May be used in parts washers depending on compatibility of components. (Viton seals or similar required.)

For sewage plants ForceField® Tar-X Industrial Solvent, whether slug dosed or meter dripped, reduces build up of bio-masses in or on; pipes, treatment equipment, drains, tanks, traps, decks, filters, grates, lift stations, wells, and everywhere.

 

Available in the Following Concentrated Sizes

                                   5 Gallon         55 Gallon

      

 

 

HMIS  Health: Fire:  0 Reactivity: 1

Appearance: Clear Light Yellow Liquid

pH: <1

Odor: Slight

Solubility: Completely Water Soluble

Specific Gravity: 1.09 +/- 0.02  (9.13 lbs/gal)

Boiling Point: >100°C

Chemical Family: Low pH Salt

Storage: Above 0°C,  Below 50°C

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Skin and Eye Irritant.

 

Shield Industries, Inc.    131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327    Fax 770 517 6863      www.shieldindustries.com

 

MSDS

 

For industrial, institional, and government product sales information:

Email: info@safe-react.com

For order status, billing, or shipping information:

Email: info@shieldindustries.com

Shield Industries, Inc.
131 Smokehill Lane - Woodstock, GA 30188
(800)332-6327 - (770)517-6869 - Fax (770)517-6863

 www.safe-react.com
www.shieldindustries.com

 

Shield Industries Home|Safe-React Products Home|About Us|Contact Us

Shield Industries, Inc © 2008, All rights Reserved